Electromagnetic Double Beam Overhead Crane Working Class A6 Type QC 5~16T
Electric System:
1. Control panel protection degree is IP54;
2. Reasonable components installation, convenient for check and maintenance;
Safety Protection Devices:
Overload limiter, limit switch, interlocking protection devices, buffer, track sweep plate, bus bar protection board, anti-collision device, main disconnecting switch, emergency stop system and motor overload protection.
QC Type 5~16t Electromagnetic Bridge Crane 5t,10t,16t working class A6 with two trolleys thaat works simultaneously or separately,this crane is suitable to lift long materials(wood,paper tube,pipe and bar)in workshops or outdoor stores in factories and mines.
Lifting capacity: 5t~16t
Span: 10.5~31.5m
Constitution:
The bridge: traverses on the runway;
The trolley: traverses on the bridge and lifts up and down;
The runway: tied to the building structure.
NOTE:Power supply for the main vehicle can be either through angle steel or safety slide wire.Operation can be done in the cabin(open-type and close-type),on the ground or through remote control.
| Lifting Capacity |
T |
5 |
10 |
16 |
| Span |
m |
10.5-31.5m |
| Speed |
Lifting |
m/min |
15.6 |
13 |
13 |
| Traveling of Trolley |
92.7/93.7 |
92.7/93.7/86.4 |
76/89 |
| Traveling of Crane |
39.5 |
43.8 |
44.5 |
| Operational Model |
Cabin; remote control;on the ground |
| Working Duty |
A6 |
| Steel track recommended |
43kg/m |
| Power Supply |
Three-phase A.C. 380V, 50Hz |
Main Features of QC model Crane:
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine.
Attention:
Safety is the most important issue for cranes. To ensure the safety,It is prohibited to use the equipment in the combustible, explosive or corrosives environment.(Need explosion proof type for this).Safety system:
1. All the cranes are equipped with overload protection device, Top quality long time bearing polyurethane materials buffer, Crane traveling limit switch, Voltage lower protection function, Emergency stop system and so on.
2. All operations are controlled by central control system. Excellent After Sales Service
3. The whole machines would be guaranteed for one year from the test run date.
4. Low charge for continue maintenance when warranty is expired.
FAQ
Q1. What do Henan mine crane do ?
A:We design, manufacture, install overhead crane, gantry crane, port crane, hoists, winch and provide customer lifting solutions.
Q2. Do you provide professional crane servicing ?
A:Yes and our service team offer a range of professional services to installation and maintain your crane.
Q3. What do I need to consider when purchasing from you ?
A: Standard items to consider when purchasing any lifting equipment such as overhead crane and gantry crane or hoist, it including safe working load, span and lifting height, duty cycles and on-going cost of spare parts.
Q4. What makes you different from other manufacturers ?
A:We have trained service technicians who will be able to get your material handling equipment up and running, and have been providing our customers an effective service solution.
Q5. What areas do you service ?
A:We can send engineers provided installations and maintenance in all over the world.
Votre message doit contenir entre 20 et 3 000 caractères!
